EN
DE
ES
FR
Hall-Effect Multiturn Absolute Encoder MAB36APM
Parametrizable multi-turn encoder with analogue output and ball bearings in standard Ø36 mm metal housing
Click here for series HTx36
- Start and end points easily set in field via dry contacts
10° to 200 x 360° - Ø36 mm housing with servo mount flange
- 12 bit resolution
- Analogue output: 0…5 V, 0…10 V, 4…20 mA
- Supply voltage 8…30 V
- Ball bearings
| Sensor technology | Hall Effect Encoder |
|---|---|
| Effective electrical angle of rotation | 0...10° up to 0...72000° |
| Functions / Features | Metal housing, Without mech. stop |
| Resolution | Absolute 12 bit |
| Output signal | Analogue |
| Electrical connection | Axial, Cable, Radial, Connector |
| Protection class | Up to IP65 |
| Mounting | Servo flange, Threaded holes |
| Shaft diameter | 6.00 mm |
| Housing diameter | 36 mm |
| Housing depth | min. 29.9 mm |
The multiturn encoder MAB36APM allows a flexible and exact adjusting of the start and end point as well as the direction of the signal by the customer. The counter state of up to 200 turns is stored in a non-volatile memory. During power off it is possible to turn the shaft ±179° without loss of the position value.
The MAB36APM is factory programmed to an electrically effective angle of rotation of 10 turns = 3600°. On request, other user-defined electrically effective rotation angles can be ordered as an option or programmed by the user himself. For quick, safe and easy programming of the MAB36APM by the user, MEGATRON recommends the optionally available MEGATRON Programmer.
The programmer is needed only once. It can be programmed with this any number of MAB36APM. The user-supported programming is also possible by creating an external circuit. This external circuit is described in the Programming Guide
